Thanks in advance for your views
I’ve had a brickie come and block up an external doorway. It’s a little scrappy as he had to finish from the outside only. I will fill any gaps in the mortar before proceeding.
I’m planning on using the area as a utility area with a stacked washer and dryer.
I...
Hi
I’ve started renovations of the living room, and want to open up the fireplace to renovate and add in a bioethanol burner. I’ve started the work and it is a small fireplace and no obvious lintel (though I’ve heard they can be quite high up.
Key question - can I remove the blocks used to...
Hi all
Thanks for the advice, so far, so
I've looked at the fuse box, and as I said before it uses MCB's. the mcb for the oven says B20 on it (there are two B6's and two B20's) so i assume this is a 20amp circuit.
The terminal outlet box is metal and the earth wire from the old oven is...
Thanks for the help
There is a socket on the wall above the worktop, built into the control unit/cooker switch, however the lead which comes from the oven won't reach that far, and there are no other plug sockets that side of the kitchen. Is there a way to convert the terminal outlet box into...
Last but not least the website says this about the oven
Energy consumption with a standard load, top and bottom heating: 0.95 kWh.
Energy consumption with a standard load, pastry function: 0.79 kWh.
Thanks
Plus the terminal outlet box is really just a terminal block in a metal junction box, this leads to a control unit which also has a normal plug socket
Cheers
Thanks
Yes it may well have been 0.95kwh, I've not got the actual oven in front of me to check, I've got the manual here, attached are jpegs of two pages on installation
As you can see they're pretty uninformative
Thanks