Recent content by AndyMN

  1. A

    Bentone Electro oil Motor/Pump problem

    Noted - thanks again.. Andy
  2. A

    Bentone Electro oil Motor/Pump problem

    I wanted to leave the burner in place if possible and just remove the motor - is this not possible? Andy
  3. A

    Bentone Electro oil Motor/Pump problem

    Ive checked parts center for the motor and this item looks exactly the same - is this an easy swap??? There is 30mm clearance behind the motor and I would hope that once the 2 motor fixing bolts are removed the motor can be pulled off of the pump and lifted out of the boiler external housing...
  4. A

    Bentone Electro oil Motor/Pump problem

    Many thanks for the info Andy
  5. A

    Bentone Electro oil Motor/Pump problem

    Motor (nameplate was on the back of the motor - typical!!!) Simel CD 31/2070 90W 240V 1PH 50Hz 2 pole 0.65A 4 uF cap Boiler Panda 65
  6. A

    Bentone Electro oil Motor/Pump problem

    I have an issue with my oil fueled boiler - it is fitted with a Bentone (Swedish) Electro oil AB motor/pump assembly which has become very noisy - like screeching. It sounds like it could be the motor bearings (there are no grease points so probably sealed bearings anyway) The motor is...
See more
Back
Top