can aynone help please? Does anyone know? I have seen 2 inch versions on US websites, but I don't know if their threads and sizes would be compatible with our stuff over here - I guess not.
Is it possible to get a strainer basket waste for a sink with only a 2" (50mm) aperture? I'm hoping I don't have to replace the sink.
I have recently moved house and we used to have one of the std 3.5" strainer baskets, but now just have a std waste with a plug. Those awful sink strainers...
Hi - I have searched on various 'immersion' heater threads and got some clues to my question, but am not confident in my assessment of my problem - so hoping soemone can advise please.
I have a double 13amp RCD socket in an airing cupboard upstairs. It is fed with 2.5mm cable direct from the...
I opened up the self-contained unit, removed the transformer and then re-wired the transformer above the kitchen cabinets. The unit now has 12v going into it from the, now, external transformer - instead of 240v. Siting the transformer away from the extra sources of heat/steam seems to have...
Thanks for the quick response. Yes moving the kettle was the obvious choice, but not preferable or easy given that all the kitchen work surfaces are covered by these low-voltage halogens.
I was rather hoping someone could suggest a product that was capable of dealing with this scenario - or...
Hi, I have been following threads for a while - some good advice coming from knowledgeable people here.
I have a problem with some low-voltage, under-cabinet kitchen lights that I hope someone can help me with.
I have a 3A FCU coming off the kitchen ring main to which I have 3 banks of...