Thanks Dextraneous, I didn't know that such thing as a roof vent tile existed. I assume that the 4 in duct connects tightly to the underside of the roof vent tile so that the steam doesn't leak out?
Noseall your post was most unwelcome. You are not on Twitter.
Spark123 you don't seem to have read my opening post clearly. I have not suggested leaving the box open.
Currently I have an electric pumped shower where a 15mm copper pipe comes out of a header tank and straight into the...
Sorry I should have been more clear, I wanted the equivalent of 100W output of light that you would have got with the tungsten filament bulbs but use less watts on the actual device, if that makes sense.
Hi,
I want to install an electric shower. The electric shower (10.5 kw) will of course come with it's own shower head. I want to add an additional larger overhead shower head which will be fixed to the wall.
Can I connect the outlet of the electric shower and connect it to the divertor so...
I'm looking to install a fan light combination on the ceiling within my shower enclosure. I don't want to go to the trouble and expense of ducting the steam out through the wall.
Is it OK to place the ducting hose in the header tank of the central heating system.
Alternatively if I...
I'm looking for a fan light combination on the ceiling within my shower enclosure. The ones I have seen so far either don't produce enough light or the fan doesn't seem to have enough oompfh to draw the steam out.
Can anyone recommend one that gives at least 100 watt light out put with a...
My niece has a mixer tap, which when opened, for the first 30 seconds the water comes out as normal. However afte this the water gushes out at a much rapid rate. What can be wrong?
I have unsatisfactorily cut a single worktop with various circular bends to house an oval sink. The cutting has not been very good.
Is there a U shaped rubber or flexible edging I can buy to fit over the worktop edge like you see in office computer desks?
I have a 1.6 Vauxhall Astra automatic in which I had valves cleaned a month ago as the car would conk out before it slowed down to a halt. Now I've got the same problem again and it's going to cost over £250 to have them replaced, which I can ill afford right now.
Can someone tell me where...