Recent content by barcelona

Thanks for the informative answer. And I can upload t my viginmedia space then ?

I just want to know really If I can setup two ip cameras through a d-link 615 connected to a virgin media always on modem without having to have a pc on all the time.

The real problem right now is I can't get into my qnap ics 1013.

I did this with my old pone, but when I was o windows xp.

Was hoping my isp would allow me to upload from ipcamera, will have to ask them that i think. Cheers

I just want a camera that will do its job, I am willing to spend around £200 on each camera.

I have a galaxy s2 also have a qnap ics1013 It used to work one but I that was before I went from xp to windows 7, not sure. Cheers for reply.

I am going away for a few days and plan on buying 2 outdoor ip cameras, that will be hard wired to a router, I know I need to use a pc to configure the system, but my questions are. Once the system is setup can you power off the pc until you come back without affecting the ccctv ?. Do I...

After closer inspection I found all eight zones are used and expansion board's are no longer available. Been down to the local security shop and got an R8. Only £140 for everything I need. Sorted. Thanks for the advice, much appreciated.

Cheers. No it's a ts800r. So I should be ok ?

Cheers for the reply. Does that mean I don't need the engineer code to add the sensor's ?

Hi, I have a Menvier Ts800r with seven out of eight zones used and one free. Can I add two door contacts to the spare zone, and add a pir to an existing pir circuit without needing...

I'm happy that I made his installation no less safe than what he already had. And he's happy now he can wash properly. I'm a mechanical engineer not electrial but i'm no fool.

Hi, I have four large conifers in my garden that block a lot of sunlight to the windows. Roughly how much should it cost to have them removed ? Cheers.