actually I have 3 years experience on tools and are best part qualified as a sparky, I'm venturing into inspecting and testing,and with my present employer will be conducting or should i say participating with said tests.
my experience with three phase is limited and i just wanted some idea if...
hi I could do with some help
how do you recogfnise what kind of type opf 3phase system is present in an installation i.e. tnc-s, tn-s
single phase I know,but three phase i don't - some pics or links would be great
hi guys.
my boss has gone away for a month and has left me to carrying on first fixing on a new job. well the site manager from the previous site has contacted me about the main entrance door not locking properly i.e. the hinges or whatever they are onb the lock that is controlled by the...
I have a hand out from college that covers all about fault finding and most likely causes of - post your e-mail address or something and I'll forward them to you.
________________________
Lynda, moderator
please note forum rule 7
An insulation resistance tester needs to be able to supply an output of 1mA at the required test voltage?
Can someone please tell me why.
I've checked all my books, including GN3, Regs, OSG, and I can't find the answer to my querry
Thanks in advance
How long should a D-lock "test" be applied for i.e. how large a current should I apply in D.C to be able to perform an Earth Loop Impedance Test?
Thanks in Advance
Thanks for that. I'm a third year apprentice and I could'nt for the life of me find anything on
"Soft Testing" in any literature I own including GN3, OSG, REGS
Thanks Again
Anymore other ways just for future reference. By the way I'm on my second year... and I like to be able to know how to solve a problem before I encounter one.
Thanks in advance
I was undertaking eath loop impedance tests on my sockets today, and the RCD keeps tripping out before I can get a reading.
Any ideas? how I can get my readings
Cheers
Vapour Proof Conduit can I use normal PVC conduit in an area where there is the possibility of Sparking or should I use normal steel conduit?
Will I need to buy special glands/ grommets/ couplers?
Thanks in advance
Hi I'm spuring off a double socket in my garage (5A Switched Spur) to a transformer and from the transformer to an inspection pit.
Now I know that at the moment my sockets in my garage are 1metre off of the floor. Should I install the transformer to the same height?
The transformer will...
If the room has no bath or shower, what is it exactly that makes it a bathroom?
Sorry I meant toilet.
Is this an existing switch or a new one? Are you supplying the fan from the lighting circuit, or another one? Does the fan have a timed overrun feature?
Yes it does (timed overrun...