I am converting one end of a garage to be a guest bathroom with level access shower. The existing concrete floor will be built up around 200mm using PIR insulation and screed.
My question is how do i fix the wetroom former? Can i lay the former directly onto plywood over the cellotex or should...
Hi,
I have noticed a crack in a floor tile. It doesn't look like its from something hitting it. Not sure what caused it but was hoping someone can advise me on how to repair it.
Its about 45mm long and I have attached three pics from various distances.
Cheers
Jewsons, Wicks, Selco Travis et al are “looking after“ regulars. So even if a place has a delivery I can’t get any. I wonder How many of these regulars are the ones selling on EBay and Facebook at scalped prices?
BG are posting updates now saying production is higher than Pre-lockdown. So where...
I have a pair of oak doors both rebated. and the latch set is a Union rebated mortice latch.
I know its going to be tricky especially with leaving a thin wall on the catch plate side but I am stumped as to how I drill the 25mm (approx) hole for the latch seeing as the centre line is bang on the...
I worked with a heating engineer replacing my daughters CH. He used push fit on the ground floor buried in the screed. Then for upstairs it was soldered copper.
in my own home I am virtually all push fit on copper for my CH and plastic for the bathroom.
I intend using a valve with TRV and lock shield in the same body. The TRV adjustment is horizontal. The inlets are 50mm centres. I’ve used some left over 10mm pipe from our kitchen underfloor heating. Push fittings work but standard PEX pipe inserts are too small and I’m concerned that the...
Hi all,
I am trying to order a combined rad valve with 50m pipe centres. The Milano web site offers odd sizes such as 14mm and 12 mm but not 10mm. Am I missing something?
I just need to order a euro valve that will connect to 10mm plastic.