The guy we got putting this boiler in has gone on holiday. We are doing the pipe run under ground.and got to get it back filled I picked up 15 mm pipe to make sure it's enough but do I have to have 2 pipes for flow and return. Only it's to short and I want it to be right for the guy...
Hi All we got to price a job i am gas safe but not oil We got to put in a worsceter bocsh 25/32 combi I WILL GET A REGISTERED INSTALLER to hook up and commission but i got to work out the price for the job so my question is
The run form the tank is 28 meters what size pipe would i need is...
On my spec on a job just noticed that it has i am to heat test my pipe work ?????? am I not sure what this means any help please guys
I am guessing its not just use hot water
I have a 40 in plasma phillips flat tv. And it has 16 lines across the screen it has happened before when it was under warranty the guy change something and it was sorted for a year or 2. Any one have any idea what I would need to change model number is azpf732010
Every time it reset it worked for 10 min. The last thing the fitter said was that he has got it working but he has put a fault finder on it and it said there is a fault on the fan Can you plug in a computer to boilers to tell you faults ? Or has he just used a muilti meter
Is there any system that has a header tank for the rads but no vent pipe because this place had no vent pipe on the header tank only on on the cold tank (for hot tank ) I was only about 10 year old install and it was a bastard to refill
I got a circulating pump wet at a job and it stop working also the boiler ( glow worm micron 55 ff ) went to lock or , replaced the pump and the boiler would stay on for 10 min then lock out the customer said she had a service plan with a local guy so I did not look at the boiler the guy says...