Recent content by briershire

  1. B

    diy pig roasting machine!!

    hi, i wonder if anybody can help me i would like to build a pig spit roasting machine and was wondering if anybody has any plans available i have trawled the internet looking for some but to no avail? thanks darren
  2. B

    hotpoint wma 10 drain problem

    right after getting my brothers friend to look at my wma 10 who happens to be a washing machine repair man ( he could have told me sooner!) he has examined the machine and found everything that i had done to be fine and of help to him as it has cut out his time examining as to the cause of the...
  3. B

    hotpoint wma 10 drain problem

    ok now ive got a working pressure switch but when connected up i either get a constantly working pump and no spin or a spin and no pump kicking in ,depending which way round its wired i think the washing machine may well be possesed!
  4. B

    hotpoint wma 10 drain problem

    hi when i blow through the vaccum pipe the switch clicks in , but have removed the cover from the vaccum switch and when manualy depressing the rubber seal the switch clicks but does not start the pump so am i right in presuming this is a faulty switch cheers darren
  5. B

    hotpoint wma 10 drain problem

    hi breezer checked the pump and is working and running quietly away from the washing machine
  6. B

    hotpoint wma 10 drain problem

    ok ill try that do you know if it matters which way round the + and - are?
  7. B

    hotpoint wma 10 drain problem

    the pump is plugged in!
  8. B

    hotpoint wma 10 drain problem

    at the point where the programme should kick the pump in to empty the drum nothing happens and it will try to spin but because there is to much water in the drum it will try several times to spin the water out and then give up and light up the programme end light. during this process the pump...
  9. B

    hotpoint wma 10 drain problem

    thanks but all the pipes have been removed and are free from any blockage, the pump housing has been taken off and the impellor is free from blockage, and the plastic sump thingy under the drum has been emptied of various coinage, the water exits v fast as i would expect under gravity through...
  10. B

    hotpoint wma 10 drain problem

    please can you help i have a rather aged wma 10 recently it has been unable to drain and will only do so by lowering the drain pipe into a bucket. when it tries to start to drain without the bucket method it makes a strange clicking noise which appears to be coming from the drain pump , i have...
Back
Top