Recent content by Briner2k

I have developed a fault with my boiler when requesting HW or CH the boiler will flash 60 ( manual says either low pressure/pump fault) and after a couple of minutes the fault will clear and the boiler will fire up. The boiler pressure is 1bar. When I removed the boiler cover, the first micro...

what do you think would be causing it to flash on fault on HW sensor if the sensor seems fine? when the demand for HW is put on the diaphragm is fine as the plunger hits the microswitch but have noticed that the diverter plunger moves up and down like it wants to fire the boiler up but think...

I have checked the sensor and that's ok I proved this by swapping the wiring on the HW (green wires) and putting it on the CH sensor and it was still flashing 70 and when I put the wires from CH to the HW sensor the light was out. I have checked for continuity in the HW wiring and that's ok. Do...

The problem what I have is the neon 70 light is flashing and reading the manual it says fault on hot water sensor, this problem came up a few week ago but somehow fixed itself. I can only get HW when I put the demand for CH on. Anyone got any pointers? cheers

That's fixed it thanks alot for your help.. Top man

The pin that activates the top micro switch is always stuck up when there is no demand, when I manually operate microswitch boiler fires up but only when the fault light clears

I have been having problems lately with my baxi 105e boiler the 60 neon light is always flashing up indicating low pressure or pump fault. When I ask for HW the micro switch makes and light indicates on the boiler but the burner does not come on so I get no hot water, after around 2 mins the...

I have been having problems lately with my baxi 105e boiler the 60 neon light is always flashing up indicating low pressure or pump fault. When I ask for HW the micro switch makes and light indicates on the boiler but the burner does not come on so I get no hot water, after around 2 mins the...