Both appliances will be on the one circuit from a 50amp isolator switch but the hob and the oven will have their own separate switches. Also the Hob and oven will be around 2.5 metres away from one and other.
The reason I would like to use 6mm is two fold. Firstly I have recently aquired...
Because of the way the current cooker cable runs in to the consumer unit I can’t replace it without removing the consumer unit and the board it is attached to and that requires lifting a false floor :-(
Also the kitchen is being re located to a separate area of the house so the old cooker...
I'm currently installing a new kitchen and replacing my cooker with a separate hob and double oven.
The hob has a total wattage of 6600 watts and the double oven has a total of 4400 watts
I plan to run a separate cable for each appliance from an isolator switch placed next to the consumer...