Recent content by chrisbonduk

Got some slotted panels todo the weekend with a gate. My plan is the following: Put some 2x1 batten in the grove one side then a 4x4 post the other side. Luckily when the concrete posts where delivered they have 2x 16mm holes that look in the right place I need them. Is 2x M10 Coach...

I'll be blown thanks the waste pipe fix I did when it leaked a few weeks ago is blocked going to go to wickes tomorrow and get proper joint to stop it happening again

Yes but it was more of a make shift thats last 5 months with washers and jubilee clips. Going to check now thanks only part not checked.

I have a hotpoint BHWD129 washing machine/dryer. The pump is not letting the water drain out. Here's what i've tried already: - Removing one end of the slump and checked for blockages, didnt seem to have any (did the end with ball in). - Removed pump chamber and no coins etc. Turned...

This was a push and twist type connection to the drum and had a hook around the dispenser - should this have some type of connector to secure it?

Hi, The dispenser drawer hose that connects to the top of the drum has become dislodged for the second time and is leaking a lot of water. I've checked the water pump filter which was blocked with a bra strap after i fixed it about 3 washes ago. The dispenser drawer hose is now loose...

Definitely the dispenser hose. If I let it dry out over night i'll give it a go tomorrow see what happens. Any other tips or is it worse than that? Thanks, Chris

Well that fixed the main leak - but now it stopped during the cycle about 10 minutes in and started leaking foam. Only place i can see it coming from is the drum inner part. I pumped the water out then tried putting it on a spin cycle but a very large whinning sound is now coming from it...

just pulled it off completly then reseated it from the bottom first then the top ran my finger round seems to have a complete seal now. its running through a was cycle ok without leaking so that seems to be it!

Hi, Got water coming out all over floor taken back off and top and tip it slightly whilst on normal cycle and can see the water is coming from top of the drop by a rubber thingie (sorry dont know what its called). The seal looks like it's dislodged - how do you put it back in? The basket...