Recent content by coloured

I initially suggested to him to look at box profile cladding which would last longer

I thought of installing a lift for anyone that want's to do this:giggle:. It just a garage roof for god's sake you have a builder/roofer up the ladder and mate passing the sheet when needed.

Agreed 100%.

it's in a private yard so no issues with any hinderance and easy reach with a ladder. 2 people

A friend needs to replace bitumen sheets on a row of garage. The rafter length is 3.8m so 2 sheets with overlapping need to replace 36 sheets on each site. 1. Can someone qualify how long it would take to remove and put new sheets. Thanks in advance for any useful replies.

Hi Helping someone to replace his roofing sheet over garage. Can someone advice whether its easy to work with a full length of 12' sheet as opposed to 2 x 6'. Would there be any issues just putting the box profile on bitumen sheet to save removing them. currently there 2x16 bitumen sheets on...

i am going to have to buy a new stapler, so wanted to make sure i get the right one

quite a narrow profile to staple http://signof2000.com/index.php/our-company/item/51-aluminum-steel-stitch-system.html

I was surprised too

Hi Looking to staple awnings to aluminium frame, can someone recommend which stapler to use please, just a 1 off job. otherwise if someone can do this at the right price, then happy to pay, this is in Leicester. Got 3 awning to staple. The staples currently used are like m-shaped.

newscan - pizzamaster, is the mfrs and it's twin deck

at the back of the oven it says, 240 V AC 1/N/PE the guy I bought from said that it is 16Amp

I have a 32amp mcb for an oven. The oven is connected to a 2 gang cooker switch. Is it okay to plug a pizza oven rated at 16amp. this is not for permanent use just like one a week for an hour or so. I wont be using any other appliance at the same time.

Cut the end bit of a 12v adaptor and connected the 2 wires to the blue connector.

resolved