no we only turn on tap in sink because for some reason water leeks into overflow, so by turning on tap then it leeks into waste, have turned off feed to immertion tank and tap for feed from hot water when its turned off you get a dribble when it turned on its as it should be
I have water dripping out of a hot tap when its open. If closed its leaks out of the over flow .
I have put new taps on immersion heater and cold feed into tank.
Not sure yet if its cold or hot water leaking but with two new taps it should not leek hot water
anyone heard of this
make sure there is two air vents, that will stop damp if your not on an out side wall put in air vents or pipe that will take you to an out side wall , done my daugthers place six months ago no damp now
if you mean combi boiler, by combination cylinder then yes thats what it is , i only changed like for like when they moved in pipe go on out side of cylinder but is covered in foam
i have put two 22m taps on the cold feed which go into the tank the taps are there so my daugther can turn off water as it is pushing water into header tank and leeking once they are turned off it wont leek but for some reason water is going into header tank and leeking
I put in a new combination cylinder in my daughters flat about three years ago, but it now keeps on leaking from the overflow pipe.
I have put in 2 gate valves 22m and get her to turn off every day and turn off elec, but cant find out why it sends water into the header tank. When the mains...