I propose changing. Bungalow into standard house.
My question is what is cheaper
cavity brickwall or tile hung timber frame
Any advise would be welcome
Thankyou for your reply
The door frame is about 3mm out from top to bottom but if if this was corrected it would make the gap even bigger
The bottom door is definitely the problem ie warped, This I believe has been caused by the 2 panels in the bottom door that are held in situ by rubber seals...
Hi
I have had a new stable door fitted however the bottom door is warped and when shut has a gap of appox 7 mm at the bottom. When the bottom door is locked it pulls the door straight. therefore when shut but not locked there is a dad draft.
The company that installed it is saying this is how...
Thankyou for your comments. I have reduced the size unfortunately it is not practicle to do anything between this and the large layout. Do you think this would now pass
Thanks [/img]
from case officers report - reasons for refusal
The introduction of the first floor element of the extension creates a large gable feature
which would create a discordant feature to the front elevation. This is coupled with
uneven fenestration to the extension with the windows not matching...
the refusal was partially to do with the rear of the extension which i then revised also to do with not centralised windows in the front of the new extension also i had said front to be rendered white was not inkeeping with the houses in this section of the road, there was no mention at all...
Yes as far as i am aware this is original. I have been here for 25 years.
at the moment it has a flat roof, i was thinking of adding hip roof to the planning application would that make any difference as to wether it is relevant or not
I have a chalet style house with a large dormer in the sloping roof at the front. I applied for a 2 storey side extension which failed. i then spoke to council with regards what i needed to do to obtain permission these changes were made but now they are saying existing dormer looks to big can i...