Recent content by craig20102010

Don't think there was anything on these about being set. They are just eres and elegance trvs. When the noise was happening yesterday I opened one trv and it was still making the noise.. I suspect it was coming from my daughters bedroom trv who was asleep at the time.

Thanks that's a good one to check but they're all multi directional trvs. It's only started happening recently. Well I say recently within the last year.

Well the system is new and has been flushed several times when all the new radiators were installed. It's been installed now 4 years with all the new radiators running.. I understand that the water at the boiler will be the primary heat exchanger temp but it shouldn't be heating it past what...

Having some issues with my boiler. One of the main issues is the amount of air it seems to be producing from no where and not bleeding it off it self when I can hear it going through the pump. I have to bleed the radiator every week. (Highest rad in the house). With this I get an annoying...

At least I'm not on my own with this. The links were fine and very informative. It was the comments to follow that were annoying and insulting and really unnecessary. I believed that coming on here was doing as you call it 'a proper job' to come on and seek information. I received the...

It's not that I didn't know. I was just asking to check and see what other people may recommend incase they suggested fitting a larger cable incase of future upgrades Etc or anything I may not of thought about. This is why I asked. I know from looking at various sites what the cables are...

lol this is what im doing here, asking for advice. In future i wont bother asking for advice on a forum as people just seem to get frustrated and annoyed and turn a simple job into such a difficult one. Anyway iv got what i wanted to know. I know its safe what im proposing so feel free to...

Cheers bud i will do. I guess all the sockets in my house are out of zone then. Unless this only applies to showers lol This is correct Iv learnt alot anyway. Iv learnt that what im doing is right and always was and that most of this discussion was a bit pointless lol but maybe i...

but surely having a switch at the oven point would be the same as having a socket on the wall? Just the socket is now an isolation switch for the oven. Its no different apart from a higher current but still protected by a MCB. You know there's an Isolation switch there so therefore there must...

your right about the microwave. The reason i got that mixed up, I was originally looking at a Combination oven which did require alot more power then a conventional microwave. As i was trying to find ways to have a second oven as well as a microwave without buying a double oven as i want the...

well its always going to be an oven as theres no room for a hob and the hob is at the other end of the kitchen where the extractor is and a large 6mm cable. So literally the most this could ever be would be a double oven. At the minute its just a single oven and ill have a second cable for a...

Cheers. ill wait on then.

Thanks bud. i thought this would be capable and within the range i would require. I just didnt want to fit anything to thick as wider cable is harder to work with. no point in overkilling it. I have thought about installing 4mm cable just incase i decide to fit a larger capacity oven...

Erm yeh thanks for that. Im fully aware. I was planning on getting it signed off by a qualified electrician who has part P after its finshed which will prove its been installed correctly and more importantly, safe. Im trying to save my self money as you can probably understand and im...

So im looking to wire in a microwave oven and a actual oven as well. im going to put eaach of these on their own circuit breaker for ease of seperation and isolation incase of any problems. They are both rated at 16amps which is really low i thought but i have checked and its correct if...