Recent content by craigban

Hi chri5, sorry i have just got back to you. The RCD rating is 63A load & 30mA trip.

Hi Steve, No it is built into the fusebox, it definitely trips on every circuit as i have just had a new heating system fitted and the lad that fitted it tested the RCD as well as fitting an earth rod outside.

Ah right got that, Thanks a lot.

Hi Adam_151, By a flex outlet am i right in thinking you mean a junction box?

Hi Taylortwocities, No there is no cable attached to the heater, you have to remove a cover on the front of the unit and connect one to a chocbloc. I think they probably leave the cable off so that people dont just stick a plug on and use it from a socket. I want to run the cable...

Hi again chri5, I have just checked the zone diagrams as you suggested and would say that the positioning of the heater would fall into the 'outside of zones' category as it is at least 6 feet away from any water supply. Thanks again for all your help, Craig.

Hi chri5, thanks for your quick reply. Sorry i forgot to mention the circuit is RCD protected and that the heater is to be fitted above head height on the opposite wall to the bath which is about 8 feet away. Could you please tell me if the positioning of the heater seems ok and what size...

Hi, i have just purchased a bathroom wall heater which needs to be hard wired with the mains electricity via a 13A spur. I already have a live switch on the wall outside the bathroom which is wired directly from the 30A fuse in the fuse box which was originally used to supply a shower when i...