Recent content by dannynasir

Thanks a lot, away from home at moment, back on tuesday will try then, will let you know how i get on. thanks again.

Hi wonder if you can help please, my combi boiler ariston aco27 works fine heating and hot water, but the pressure gauge is at zero i tried putting more water in via the loop but the needle dont move, is it something i can check or do i have to call out an engeneer? any help...

whoopeeeeeeeeee its working. :) tried the cylinder stat but still the same, so i thought i would pull the timer control panel off and have a look, it hooks at the bottom and screws at the top, and it had come away at the bottom so all the terminals were not connecting, so took out the screws...

sorry havent got round to it yet been busy will do tonight and let you know.

i would imagine the wiring is correct as it has been working ok up till now. have a room stat but since the boiler was changed it wasnt wired up by the installer to the new boiler so i have not used it since and everything worked fine up till now. i thought the cylinder stat was ok as i...

hi again fitted a new actuator head------- still the same problem. i will try yo explain the fault in detail and i hope somebody can please help me before the cold sets in. i had a basic old boiler that did the heating and the hot water, i thought i would be clever and get a new boiler fitted...

hi mine is a honeywell 3 port no. V4073A1039. can you get actuator heads separatley for them or will i have to buy a complete valve. thanks.

hi mine is a honeywell 3 port no. V4073A1039. can you get actuator heads separatley for them or will i have to buy a complete valve. thanks.

Hi it is a 3 port valve, when you say change the actuator do mean the motor or the complete top half of the valve. i.e without the valve so i dont have to drain down? sorry if that does not make sense. thanks

Hi Guy's Hope someone can help My boiler fires up and heats the water, only when water in the hot water tank goes below a certain temperature,then if i pull the lever on the diverter valve to manual override my radiators get hot.but as soon as the water is hot enough (i assume it reach's it's...