Recent content by DarrenCarnall

There was a fair bit yeah, i scooped out as much of it as I could. The hole that was left after I had to hacksaw off the bolt/filter I filled up with Milliput just to keep it watertight, and we've been using the machine since (at least 6 times so far) and it's working perfectly. ....and it...

well eventually after several hours, lots of head scratching and endless cuts and scratches on my hands (and lots of swearing) I managed to get the condenser free and removed the TOTALLY mangled metal filter. No wonder the drum was banging horrendously. I managed to remove it and will be...

actually I've just had a better look at it in some better light and it IS plastic. My apologies, it looked (and felt) metal. I'm going to try to remove it now... access is tight to get to things, but I'll let you know!

I'll try to take a photo tomorrow morning if I get the chance. Mine sounds slightly different. The back has a smallish panel that comes off (not the whole back) and what appears to be the condenser is large and metal and appears bolted on at the bottom of it (in the middle of the hole where it...

you know? you're right! I've just looked at the back of the machine and there's a large metal part that attaches to the back of the drum right where the thing is trapped. Now I just need to find out how to take it all off. (only a small panel comes off the back, to remove it all for better...

Hi. We have an Indesit front load washer dryer and recently started hearing occasional banging/clattering during the spin cycles. The last time we used it it got so bad that the machine started jumping around and sounded like it was about to explode! I did some reading and checked out the...