Recent content by daven1986

Thanks, was worried about mixing inhibitors and causing issues! Any recommendations for the best inhibitor?

Hi, My radiators have recently been almost fully drained - I think there was probably some water left in the lowest rads. Is it safe to go ahead and add new inhibitor (I'm not sure what was already in there), or should I redrain it from the lowest point? Thanks Daven

Many thanks John D, I will give it a shot!

Thanks for the replies, i can't duct separately due to space, the runs would have to overlap. I don't think this is multi point extraction, the kitchen will have a good with a fan, it will just into a duct with an inline fan that serves the bathroom. It isn't one fan sucking from many rooms...

Hi all, I have to have a fairly long duct run for my kitchen extractor hood and the bathroom extractor will also join onto this run. To avoid smells getting into the bathroom, and to ensure the kitchen extractor works well, I was considering putting an inline fan after the join and wiring it to...

Thanks all, my main concerns were with the GU10 units catching fire.... I'll do a bit more research but won't limit myself to the integrated units. I may have to buy a few different units to try them out (or find a shop in London where I can see them!).

Hi, I am having some renovation work done and I'd like to install some led spotlights in the kitchen and bathroom, I've read that the gu10 led bulbs get very hot and I'd like to avoid that. So I was wondering if you can recommend me some recessed led spotlights. Thanks

Thanks, maybe something like this http://www.showerpowerbooster.co.uk/product/pressurise-both-hot-and-cold-sp22s-two-fully-automatic-shower-power-booster-sp2b-plus-sp2bu-3-year-warranty/ for the upstairs shower and just leave the downstairs to be gravity fed?

Ah sorry, upstairs shower around 0.1/0.15 bar, downstairs around 0.4/0.5 bar. Thanks :-)

Hi all, I'm installing an open vented system for my hot water (bad mains pressure rules out an unvented system) and I'm wondering if I can get away without a pump. I'm going to have 2 bathrooms run off the tank and the showers are rated for 0.1 bar. I figured if i have a 28mm pipe from the tank...

Hi all, I've seen a few threads on here which do not recommend using a vapour barrier underlay with a ground floor wooden subfloor due to condensation being trapped and damaging the subfloor. I was wondering if this advice still holds if the wooden subfloor is suspended and insulated? I ask...

Thanks Tony, now you mention the location I think I noticed the rodding eye. I'll have a word with some contractors and get this mapped out! Cheers

Thanks Hugh. I'll give a few companies a call and see what they can offer. Thanks for us suggestions, Daven

So there aren't any manholes in the garden (except for my inspection chamber). I believe (and this is what Thames Water thinks too) that the sewer runs like this: ----------------- | ________x____ | my house | Where "x" is the inspection chamber just off the back wall of my...

Thanks. Unfortunately from googling interceptor traps, I think this is what I have :( does that mean mapping cannot be done? All I need really is to find out where the main sewer runs across my garden - I'd guess shoving a rod down there until it hits the sewer pipe would do - but I don't want...