It has a magnetic filter which is slowly catching additional debris. I'm taking the x800 out and putting some x100 in today. Thanks for the reminder.
I'm loath to do any more with the rads since every valve I touch seems to start to leak at the spindle, but that's another story.
To answer my own question, I had two plumbers out who were basically useless, so I decided to remove the pump (the hot water didn't work either so it had to be downstream from the pump). It was full of debris. I removed the debris from the impeller with a small allen key and pit some x800 in the...
Hi,
My 38kw ecotech plus is failing to heat the house. It's currently 12 degrees indoors so pretty cold, however the radiators do feel warmish. Some are hot, others tepid.
I swapped one of the tepid radiators for a new one thinking it was sludged up (which it was), but it hasn't made any...
Hi. sorry for the delay in replying.. just got the texecom console open. The zone name is in the top and bottom box, for example 'kitchen' in the top and 'pir' in the bottom.
Yes it was on wintex, which I have. The keypad is right by the front door and has no flap so keeping a list just there isn't ideal. I could do that but I hoped that you could show the names since they're in there anyway.
Yes. All the zones are named so when I browse to zone setup and scroll to the names/description they all have names. The one in question is called 'shed' but it just says 'zone 18 in alarm' on the panel.
I guess the answer is that there is no way..
I have a premier 48 and it's working just fine in general.
The alarm went off at 1am last night. Turned out my wife had left the shed door open and a fox wandered in, however it was quite frustrating to spend 5 minutes at the panel trying to remember how to view which zone number 18 was.
Is...