Doobrey's latest activity

  • D
    Doobrey replied to the thread Lockshield and TRVs.
    Additional question Should the pipework be adjusted as per this diagram With the yellow being the return (moving the T-Junction away...
    • IMG_1543 copy.jpeg
  • D
    Doobrey replied to the thread Lockshield and TRVs.
    Ok, I have lifted the floor, before flushing or doing anything in the system. In the picture attached you can see the radiator in the...
    • IMG_1543.jpeg
  • D
    Doobrey reacted to terryplumb's post in the thread Lockshield and TRVs with Thanks Thanks.
    Yes ,primarily to ensure there is no blockage / restriction.
  • D
    Doobrey replied to the thread Lockshield and TRVs.
    System is a combi boiler which is pressurised. I have the ability to refill the system if the pressure is low. I will take the...
  • D
    Doobrey replied to the thread Lockshield and TRVs.
    Yup sure does
  • D
    Doobrey replied to the thread Lockshield and TRVs.
    That's kinda what I thought too. Yup, I will remove the radiator. I am thinking, removing it, check for sludge (maybe an obvious one)...
  • D
    Doobrey replied to the thread Lockshield and TRVs.
    Morning, Thank you for the suggestion. I have tried the test. IE. closed all TRVs off, except the radiator that doesn't heat up. The...
  • D
    Doobrey replied to the thread Lockshield and TRVs.
    Thanks ill give this a try in the morning. Assuming it does heat up, any thoughts?
  • D
    Doobrey reacted to terryplumb's post in the thread Lockshield and TRVs with Thanks Thanks.
    Close the TRV on every radiator that heats fully, run heating ,and see if problem rad now heats fully ( both it's valves fully open of...
  • D
    Hi all, You have been incredibly helpful in the past and therefore I am hoping you can help me again! I have a radiator problem...
Back
Top