Recent content by drewboy74

  1. D

    Baxi 105e NO CENTRAL HEATING

    Job done...thanks Dan! A few sharp words to the sparkys tomorrow i think! Thanks again lads!
  2. D

    Baxi 105e NO CENTRAL HEATING

    Dan i appear to have no wires in terminal A of the receiver. I have a blue and brown in the live and neutral, a black in B and gray in C.
  3. D

    Baxi 105e NO CENTRAL HEATING

    All knobs are fine picasso....another one for you Pete
  4. D

    Baxi 105e NO CENTRAL HEATING

    Aye Pete lol.....walked into that...been a long day man!
  5. D

    Baxi 105e NO CENTRAL HEATING

    If i wanted to remove the stat, obviously i turn the main switch off, then remove the wires from the stat into the terminal block inside the boiler. What about the wires coming from the other side of the block...do these need to be removed also?
  6. D

    Baxi 105e NO CENTRAL HEATING

    Lol bit of a novice Dan,ill end up blowing half a newcastle up man!
  7. D

    Baxi 105e NO CENTRAL HEATING

    The batteries had already worked with the unit but no i have not replaced them with duracells. Will try that also...ta
  8. D

    Baxi 105e NO CENTRAL HEATING

    Sorry...no the boiler does not fire.
  9. D

    Baxi 105e NO CENTRAL HEATING

    Yes Dan the green light comes on and have also changed the batteries.
  10. D

    Baxi 105e NO CENTRAL HEATING

    Hi. Just moved into a house with a Baxi 105e boiler controlled by a Honeywell hcw80 thermostat. The heating was ok until the house got rewired but since then the c/h will not come on. The hot water works ok and the pressure is just over 1 bar. I have reconnected the two honeywell devices and...
  11. D

    Fixed leaky gland nut but......

    Thanks for your help but managed to fix the problem. The pin was not making enough contact to push the contact strip back. Simple as that. I dont know why because i dont think i bent it in anyway but i have had to put a sticky pad on the contact strip for it to work. Thanks again for your time.
  12. D

    Fixed leaky gland nut but......

    The pin comes out slowly and JUST hits the switch,but the switch does click over. This happens when C/H is On and Off.
  13. D

    Fixed leaky gland nut but......

    Hi,i have a baxi 105he boiler and yesterday because of a leak i replaced the gland nut and diaphragm. I made sure that the pin and spring were moving ok and screwed it all back together. However,the hot water now only works when the C/H is on. When the C/H is off i get no Hot water and the...
  14. D

    bosch classixx 1200 s express

    Thats fixed it! The wife is very pleased! Thanks again for your time.
  15. D

    bosch classixx 1200 s express

    Thanks very much anyway Zipper. It was more luck than good judgement believe me!
Back
Top