Recent content by dylanF

Right I'm going to have to call it a night, thanks for all the advice I will consider it all and will Be back tomorrow with some more detailed description thanks Dylan

Just checked again turning the dial on the front gets the fan to start, the boiler clicks once as the fan starts but doesn't spark. Is there someway I can kick start the thing to release gas and light it manually?

Yeah the fan at the top of the boiler startts, so it gets power.

The fan at the top of the boiler does come on. Thanks I'll have to check that tomorrow. I'll let U know.. :?

it clicks at a certain point when I turn the dial, but doesn't do any more clicking.

Iturned the boiler off within a few minutes of the appearance of water. It the took me 24 hours to get the radiator fixed and the system filled up . The boiler has not lit since then

Yeah yeah there is a click clik when you turn the gauge from min to max.

I turned the boiler off at an isolator switch next to the timer programable thingy.

When I turn the boiler on the fan starts. When I set the gage it clicks and sounds like it should be firing up but there is just no flame. I have pushed the reset button at every stage of this process and tried it all several times. I guess the boilers about 15 years old.

If say I've tripped the overheat thing. what can I do about it? There is a reset button on the underside of the boiler, but no combination of pushing this, switching the boiler off, or tring to get it to fire up seems to achieve the required result. Yeah I've bled the rads, so the pressure...

The boiler says "Netaheat on it" I filled it up by releasing the floating ball thingy in a tank in the loft. which I had, had to wedge up to stop water continually being emptied on to my floor.

Black water went all over the floor. I turned the boiler off straight away, but could not find an isolator for the pump.

Yeah I put the inhibitor in the system as I refilled it. i've bled the rads. but don't know how to be sure I've got the right pressure. Cheers 4 prompt response but I really need a step by step guide as to what I can do to: Check the pressure is correct? Check the pump is not causing a...

I drilled a hole in a pipe supplying a downstairs radiator, thus emptying the dirty water from the central heating system onto my lounge floor. I had the hole fixed and refilled the system, but now the combi boiler (potterton netaheat 40e) in the kitchen will not ignite. What stops the boiler...