Recent content by eifion1967

Just turned on the rads for the 1st time since March/April. Rads not heating and pump is making a strange noise, sounds 'dry' if that makes sense but only now and then, seems to run fine rest of the time but of course rads don't heat :?: . The pump is used for both the hot water and the...

We had problems with rats recently in the garden, not the house thankfully and our cat left us a present almost exactly like your pic. We eventually called out the ratman but if you fancy some fun get yourself a .22 air-rifle/pistol, I spent a pleasant afternoon the end of last summar picking...

Hi, our house used to be completely flat-roof but we've re-roofed most of it except for a small part (about 15 foot sq). It's about 6" thick concrete laid on top of boards & joists and of course being 6" thick we have had no problems with leaking into the house. However, around the edges...

Hi, have today replaced a 3 way valve as it was faulty. Drained the CH system and re-filled and CH works really well after bleeding all rads but HW not working well at all. The return pipe from the tank is stone cold so I assume I've got an air block in the circulation system. Have bled the...

Hi, thanks for all advice, does this mean that if I buy the new version with the easily removable head that it won't screw into the valve body? Just hoping to not drain the system to replace the whole valve. Cheers :D

Our HW is working fine by not CH. We have a 3port ACL valve as above connected to one pump. The pump's okay as it works for the HW, thermostat is okay so narrowed it down to valve. I can get it to work by moving over the lever/latch and heating now working but I obviously now think I need to...