Recent content by fingerjabber

Hi i have a window with a broken hinge, the window uses side hung friction hinges the size is 10" long but all the places i have tried you can only get 12" or 16" side hung. Can i use 10" top hung friction hinges or are they a different spec? cheers, Andy

Just to add i dont have any central heating either the boiler wont come on at all cheers

hi Tony Vokera on a FP repair what is this? thanks for quick reply Andy

hi my vokera linea 24 is about 5 years old and this morning put the bath on and found that the water was cold, the boiler was flashing the red light and an error code 06 being displayed. the manual says just to reset the system (which i have done before in the past when the system has lost...

hi all we have been away on holiday for 2 weeks and when we returned the house smeld funny (probably due to the house been shut up for 2 weeks) and i was gettin a headache (probably from the traveling) i couldn't work out what the smell was and as a precaution i turned the gas off at the...

Hi all, I’ve just had a survey report on a house we’re buying that needs modernising, the thing is the house has a lean too utility room that is part of the original building and we want to knock through from the kitchen to make a larger kitchen but the utility room is of single brick thickness...

hi, i'm wanting to fit 4 spotlights in the bathroom to replace the single centre light and want to fit them equally spaced from the corners so some will be in zone 1. which sort should i go for the 12v low voltage or the 240v ones? i've seen these from screwfix...

hi, just refitted my kitchen with and put a new stainless cooker in but while doing other work bits of plaster and grit have got on the hob and when its been cleaned its left little scratches on it cant really see them in the day just at night with the light on, whats the best way to remove...

hi m8, the shower is a seperate enclosure, the spa needs 13amp and the shower needs 3 amp thats why i thought to connect it to another FCU with a 3 amp instead of the 13amp andy

hi ban all sheds, got the spa all wired up and workin fine so just the question above m8:- "can i run a FCU from the RCD to power the shower?" thanks again m8 :wink:

cheers chappers mate done it today :D sorted andy

hi, its a shower that connects to both hot and cold water and has a pump inside the shower unit, not a mixer shower with the pump installed elsewhere got the RCD unit and isolator switch today gonna fit this on the spa pump, the instructions for the shower just RECOMENDS a RCD but if i could...

hi, just refitting my bathroom and we're having a separate shower enclosure the trouble starts with it having a concrete floor, the tray i have is just a flush one so i need to raise it up. the instructions say the tray needs to be supported on 20mm thick marine ply or the tray will break :(...

o just another quicky i'm installin a seperate power shower in the bathroom too could i wire both bath and shower to the RCB/isolator? or should they be seperate? does the shower really need a RCB?

:D thanks alot ban all sheds mate now i know what i need will defo get it sorted on the morro thanks again pal 8) andy