Recent content by fisheggs

Thanks Sparkymarka, I saw one of those push to breaks mounted on the old panel. Will try via SW+ options first.

Thanks for your reply workers. I checked the N/C contacts and indeed they were closed. I pressed the test button and held it for about 10 secs and eureka, the fire zone triggered. So it works! Now I cannot reset the smokes as in the documentation it states that they need to be reset...

Thanks for your reply Josh. I have checked all circuits with a meter and they are all well. I have removed all links from the panel and have the Zone assigned as fire. I forgot to add, the property has additional 3 hardwired mains interlinked smokes which are VERY audible. These smokes...

Workers, thanks for your advice regarding the components. I have everything wired up and found some previous dodgy cabling ewith connector blocks in the ceiling, which has now been replaced. The system was actually 6 core and has tamper on everything but the PA and smokes. I have it...

Thanks for your reply Workers. The TS500 was an onboard keypad but was located in the cupboard under the stairs , so will be placing keypad in a more accessible area. Any reccomendations for an internal sounder? With regards to the resistors for PIR's the wires are currently 4...

Hi All. I have an old TS500 which gave up and am looking to replace the control panel , keypads and the old PIR's . All wiring is in place and would also prefer hardwired. I am a competent DIY'er and can do most things, so really want to have a go myself. I would like your...

Whats that noise? http://www.youtube.com/watch?v=pmGv1d6_ijc It is fitted as part of a system with a megaflow and 2 honeywell zone valves controlling the CH and Megaflow on the same circuit if that makes sense? It doens,t appear to be the pump having checked while running with a steth...