Recent content by freddydo

Machine program has sometimes stuck on 1 min at end of program but now program will not start just makes humming noise. Have cleaned small filter in water supply pipe and machine worked for a couple of programs but now problem has returned.

If you want to use full width of the opening get a 826mm x2040mm door with a door lining kit to suit, you may have to rip this down to fit your 95mm width but allow extra for wall finish (plaster,tiles, etc.)Foam fill is good to fill any gaps after fixing lining with spacers as it's also a tough...

Yes it is an old VOELCB the main supply is 2 wire overhead and earth is to a ground rod.

Sorry camera out of action will try and borrow one but the fusebox is old wylex with 4 fuses 1 lighting 2 ringmain 1 cooker, 10mm is doubled up with tails from trip switch in fusebox so still live when fusebox main switch off, this is my main concern but never given any trouble.10mm runs to cu...

I've looked at the wiring in my present house and would appreciate some advice. The supply is fed through an old style trip switch (yellow button) to fuse box with wired fuses. A 10mm cable about 5m long runs from the fuse box (not fused) to another consumer unit which supplies extension this...