Recent content by gardenut

  1. G

    WASHER DOOR WON'T OPEN

    Magic. Thanks very much.
  2. G

    WASHER DOOR WON'T OPEN

    Hi I have a Creda 1000 Supaspeed. No frills - no problems....till now. I have a drum full of washing, the cycle has completed but the handle has snapped off when trying to open the door. I have UNPLUGGED the machine and pulled the plug out of the socket. Taken the top off the machine and...
  3. G

    Changing a Dual Flush Valve

    Job Done!! Many thankx.
  4. G

    Changing a Dual Flush Valve

    I have managed to get the screws out now. There was a small nut between the bowl and the cistern that kept turning until I held it with an open spanner. Now my problem is that whoever installed it, secured it with sealer. Once I have got that off I should be able to lift the cister off...
  5. G

    Changing a Dual Flush Valve

    The fill pipe is the main pipe coming into the cistern from the mains with the valve that turns the water off.
  6. G

    Changing a Dual Flush Valve

    Hi Burnerman Oh dear this is tough. I have done what you suggested and undone the nut holding the fill pipe. On the inside of the cistern there just appears to be 2 screws connected it to the bowl with wing nuts underneath. I have taken the plastic wingnuts from underneath the screws but...
  7. G

    Changing a Dual Flush Valve

    Hi I'm in the process of installing a Fluidmaster Dual Flush Valve. I have turned off the water, emptied the cistern, undone the screws connecting the cistern to the bowl and have come to removing the nut from the inlet pipe. However, when I turn the nut the whole inlet valve inside the...
  8. G

    Repair or Replacement?

    I have just found out my toilet flush is not working. It is a button flush. When I took the top off the cistern I found the plastic attachment that fits to the underside of the button was loose and not connected to the mechanism. Let me see if I can describe it. Connected to the button is...
See more
Back
Top