Recent content by gasmaneddie

No problem for me relocating the services (Probably o_O), I have no intention whatsoever in the structural work was just curious for information on the physics of beam strengths with re guard to width , size & thickness of steel etc.

The current beam is flush with the ceiling, The reason for removal would be to remove the central pier which at present has been boxed out with plaster board to accommodate mains pipes and soil pipe etc. It therefor is a rather large obstacle in the centre of the kitchen making it very...

My daughters house has steel beam spanning approximately 5M in the kitchen and presumably supporting the first floor elevation, Cant see at the moment exactly how deep the beam is but thinking it may not be much as there is a pillar in the centre of the span presumably supporting the beam along...

I have a Eriba caravan and the gas locker door is made of ply with a metal skin either side and a bonded plastic seal around it. Unfortunately part of the seal has let water in over the years and as it could not escape it has rotted away a section of the plywood. I have now drilled drain holes...

I removed the glass from one of my smaller windows to examine the seal and frame etc. I come to the conclusion that the welds inside could be projecting to far and stopping the glass fully compressing the bubble gasket. The welds looked pretty random and irregular, I suppose if the machine used...

Hi every one yes its me again It was suggested to me I would be sued if I didn't shut up about my windows as they are now American owned. I was doing a job for a customer a couple of weeks ago and noticed his three month old windows had a significant build up of grime between glass and outer...

Interested to hear from anyone that has had Liniar windows and doors fitted in the last couple of years

manufacture of double sided glazing tape said it would destroy gasket if unit had to be replaced as as I'm sure you are aware just wanted to hear it from the manufacture/supplier themselves

Section from February site visit by Liniar sales director Don't know what exactly you want me to do here? I came down to investigate a report of an issue with your windows .It is impossible to prevent rain water passing the external glazing seals, hence why there are drain holes within the...

This is report from site visit in August 2015 Following the recent visit made by myself and colleague to your property please see comments below and proposed course of action. Observations: 1. Deposits of dirt can be seen between the gasket and external face of the DG units at the bottom of...

a

Paper business card and Nectar card both push in relatively easy even near the corners, I tried on a friends windows and couldn't even get it in with reasonable force

Update re Liniar They have now offered to send a couple of blokes down remove all glass units, clean and reinstall using flexible security tape. Also I did a test on all my windows and noticed that you can easily slide a business card down between gasket and glass unit from the outside but not...