Recent content by geoff007

  1. G

    Aid required for hotpoint washer/dryer wd62

    Today I encounted another problem on endevouring to reassemble the machine after recieving the spares. I had removed the front panel to obtain better access by detaching the rubber seal from the outer static drum. Now I am frustrated in attaching the rubber seal back onto the outer drum.. Do I...
  2. G

    Aid required for hotpoint washer/dryer wd62

    Could I please seek further advice from you on my hotpoint wd62? To reiterate the wd62 would not start the wash cycle after changing the door interlock to cure this fault, but with your expertise pointing to the neutral pole of the on/off switch I joined together the two neutrals to...
  3. G

    Aid required for hotpoint washer/dryer wd62

    To check the neutral on the on/off was an inspired recommendation on your part. The neutral wires were firmly attached and I had checked the live operation of the switch but stupidly not that of the neutral. A more thorough check showed that the neutral side was contacting only 2 out of 10...
  4. G

    Aid required for hotpoint washer/dryer wd62

    Hotpoint washer/dryer wd62 failed to start up. Bought a new door interlock switch (zv-445) and fitted. Closed door and turned on and the washer started - the solenoid water valve opened and neon light turned on. Because I had not replaced the machine back plate I turned off the washer. Since...
Back
Top