Don't hold steam stripper on 1 bit yoo long as it softens your plaster. The paper you have uo just now should be a vynal and have a backing paper. I would try taking the face off first then just use a sponge to wet the backing paper with warm soapy water . Once you have wet it all go back to...
First i would recommend you strip wallpaper and never paper on top of a finished paper. Only line walls if your plaster isn't as smooth as you would like. Remember to size (paste) the wall about 24hrs before you paper. That seals the wall and makes papering a bit easier.
The bathroom in my...
I'll check the flow rate tonight plumber on my job is gonna have a look at it for me. Thanks everyone for your advice.
Just checked the water flow with a gauge cold is running at 14ltrs a min and hot is 7ltrs a min. I'm assuming that is nowhere near good enough? Is there anything i can do to...
Hi no need for a rust neutraliser. I would scrape them down then give them a good sand. I would use hammerite on them as that is the best available for cast and metal
Hi folks I've just recently had a drench shower fitted. The water pressure is terrible. Are they fitted with a restrictor. This is the shower http://www.thinktaps.co.uk/drench-square-twin-head-thermostatic-shower-kit-valve-set-chrome-bathroom-unit-exposed~1909