Recent content by glenintheuk

Thanks for the replies once again. Used it myself yesterday for 5 minutes or so, with no issues at all - very frustrating! Pipework appears to be 22 mm to and from, reduces to 15mm near the pump (to fit the inlet valves) and reduces in the loft above the shower mixer to 15mm for the same...

Many thanks to everyone for their posts. In response to suggestions,: As the problem is intermittent - it doesn't happen every time the shower is turned on and sometimes kicks in after a few minutes - then would I be right in thinking it cannot be due to a faulty shower cartridge, or a faulty...

Also, forgot to say, the installer has become incredibly difficult to contact!!

Hi footprints, thanks again for your help. The pump wouldn't be a straight swap as such as the pipe work would need to be altered (different make). I have tried without the shower head on, just the hose running, seems okay most of the time, but this is the problem, it doesn't always happen, its...

Many thanks, it looks like I might have to give it a go. I do have a replacement 3 bar pump, would this be likely to improve the situation at all? Thanks. Glen[/code]

Thanks for the reply. He fitted a manual service valve in the loft, which he used once when we were first having problems. Naturally we can't go up there every time we get the problem. Are there are ways of fitting automatic bleeding valves (sorry for the languauge!)

I do hope someone can help! I have had a new bathroom fitted, as part of this I opted for a thermostatic mixer shower with both a fixed and mobile shower head. This is powered by a Shower mate 2.0 Eco pump. When I turn the shower on, we sometimes get a full supply, however more often than not we...