Recent content by golfdelta

  1. G

    Joists pulling away from binder - ceiling sag

    The building is from about 1900. Doesn't look to me like the binder was ever attached with hangers and definitely not supported. It's kind of half way between the two pictures below: purlin (supported on brickwork), purlin struts and binder present but no hangers and looks like three ties were...
  2. Screenshot_20200415-191033_Firefox_Beta

    Screenshot_20200415-191033_Firefox_Beta

    https://fet.uwe.ac.uk/conweb/house_ages/elements/section5.htm
  3. Loft

    Loft

  4. G

    Joists pulling away from binder - ceiling sag

    I noticed a crack developing in the ceiling around a year ago but it wasn't too bad so I didn't think much about it until repainting recently after the lockdown started. When up the stepladder to do the cutting in I noticed that there was a reasonably significant looking sag and decided I'd...
  5. G

    Vaillant TURBOmax VUW 242 E - HW overheats and cuts out

    thanks for the advice - since it's not a simple job i'll get onto the landlord
  6. G

    Vaillant TURBOmax VUW 242 E - HW overheats and cuts out

    i'm having problems with the turbomax in my girlfriend's rented house where the hot water system overheats and cuts out after a few moments of operation then comes back on again - so hot water goes intermittently boiling hot then cold. pressure is at about 1.5 bar and the problem happens...
Back
Top