Recent content by gotbadgas

Easy to highlight the bits that suit aint it. I apologise to all for the mi cop out statement, i meant alot do not say anything just point you back to your standards and books. As for the flued appliance with flexible connection, i meant o/flued.... must really slow the typing down and...

Mi's will always cop out anyway, should be fitted to relevant standard in accordance with........ i personally would never use a hose for a hob, rigid pipe all the way :D however the only thing i can remember is that a flued appliance cannot be connected with a flexi connection, nothing about...

why would it be at risk? its not a flued appliance or anything, i agree fixed pipe but like said its a MI first then personal judgement. Ive never read anywhere that this appliance must not be supplied by a cooker hose. May be just me but......?

so in your opinion do you think the motor could be sticking or the divertor itself sticking? like i said a quick jiggle on the motor allows it to work again but not sure what the jiggle actually helped the boiler do.....should of stayed longer and took a bit more notice. :? cheers

any ideas anyone?

Id also say, walk the system and check all rooms. The amount of open end pillar taps is unreal, just give a good knock on each room if house has been via keys from agent, knock and shout, still they'll not answer and you'll be checking a room where someone in bed :lol: . ive worked on behalf...

the screw is the adjustment which determines how low the plug can sit in the plug hole

quick question: does anyone know which way the divertor motor works on a w/bosch greenstar zwr 30kw jobby, cant remeber if on hot demand the motor pushes d/valve or backs off, basically doubting myself as cant remember for the life of me. hot water not working after heating demand so is the...

i went to one which been denso wrapped and a leaky stop tap also had the same treatment :roll:

sounds like either 1 part of valve has blocked/failed or they have a pipe which feeds along the bottom of the radiator which have been known to come out. It bleeds cos you have pressure from one side so to speak but one pipe (flow/return) has a fault and therefore you're not getting circulation...