Hi,
Thanks but I was wondering if someone could give me an idea of what the problem could be ie faulty PCB or faulty PD switch so I have an idea of when I do call in a RGI.
Thanks
Hi,
My boiler is not firing. The pump runs, then the fan starts and runs for about 10seconds then stops and starts again, this will happen continuously. When I lift the casing off slightly the fan runs normally but then when i push the casing on tight it stops and starts again.
I checked...
Perfect guys, thanks a lot!!!!!
Now that the new rad in the garage is warmig up I have noticed that I have placed the TRV on the return, not a massive problem because I have put isolation valves in the 15mm uprights to the rad but I have noticed that is not that warm at the bottom of the rad...
Hi,
Thanks for your quick reply.
Yes, they are on the same section of pipework, if I had piped the flow and return the wrong way round on the new rad would that be the cause?
If it is airlocked whats the best way of resolving that?
I really appreciate your help.
Hi,
I have a 15kw Gloworm boiler (not combi) and I drained down to put a new radiator into a garage conversion. I have refilled the system but the upstairs bathroom, kitchen, and new rad in the garage are not heating up the other 3 rads are fine.
No radiators are letting any air out now...