Recent content by guygb1

I took all the bulbs out and hung the wires down and this seems to have resolved the problem! If one of the transformers is failing then I suspect I shall need to wait until it actually fails before changing it. For the moment all is working well! thanks to everyone for your assistance...

Definitely MCB Is there a quicker way of testing each transformer rather than replacing them one by one?

OK. Thanks. I shall check the transformers when I get home tonight. Will it be obvious by inspecting them to check which one/s are failing? All the transformers are fairly new - fitted within the last year.

Thanks for your response. So are you suggesting that it is a coincidence that the problem occurred after I changed the fitting or could this have caused one of the other transformers to become faulty? Also all the lights seem to be working still if only for a half a minute or so until the...

The fuse for all the downstairs lights blows, which is in the main fuse box. It is a flip switch so the switch flips down when the fuse blows and I have to flip it back up again to get the lights working.

I have 6 LED lights in the Kitchen all connected with separate transformers. One of the lights was flickering intermittently so I decided to switch the light for a GU10 LED light. I removed the transformer and fitted the new light. The kitchen lights initially worked and then after a...

First the central heating stopped working, which we only noticed last night. The pressure at the time was normal. Then this morning we woke up to find that the central heating and the hot water had stopped working. The low pressure system warning light was on. I then tried...

No pump sound detected. It is as if the ch switch is disconnected

When the heating is switched on there is no reaction at all from the boiler

The system pressure is 1. The central heating stopped working yesterday and this morning the low pressure system light was on so that neither hot water nor heating was working. I drained the system and removed and cleaned the water flow switch. This seemed to fix the hot water problem but...

The valve that is leaking is the CH flow

I have unscrewed the red lever, as this does not turn. It is leaking out of the middle of the valve just below where the lever was screwed in. Not sure how to stop the leak!

I have tried using a pair of pliers but not been successful. thanks for your help

The hot water isolating valve. It is very stiff and does not seem to turn

Thank you. The hot water tap is dripping at the valve. I have tightened the valve but it continues to drip