Thanks so much bud, going to buy them at the weekend.
When you say the grey wires I assume you mean the 2 small blue/brown wires into the light itself.
I really appreciate your help, and everyone else who has chimed in.
Thanks to all.
So if I buy the ones from the sites you guys have mentioned is it just a case of swapping out the old fitting and transformer and fitting the light to the live and neutral fitted in the ceiling? I.e., I won't need transformers.
Sorry, life got busy and forgot about this. I've attached photos of the existing lamps and the way the wiring is done. I have looked into the below on Ebay which seem to be what o would need as they are double insulated. Would these be ok and just use the current live and neutral wires to...
I've seen these. The only thing i need to ask now is that I only have live and neutral wires going to the current lights- do I just add these to this connector? Assuming the earth wire on the fitting is all that I'd needed and that I don't need to connect an earth wire too which will be a pain...
Could I just swap these out for GU10 fittings which are double insulated and therefore if a lamp goes in future I don't have to remove the fitting but the lamp itself.
Or could buy 230v double insulated led fittings without transformers.
Hi all,
I want to change my existing kitchen spotlights as below:
I'd like to change them for ones without transformers, maybe even GU10 fittings or even the same type which are 240v - can anyone let me know which ones I could use?
Thanks
Lee
Hi all,
Looking to change the colour of our wetroom floor. It's a light green colour at the moment, see pic - but the wife has asked if we can paint over it.
If we can, can someone please advise on the paint/materials needed and also the process.
Thanks for any help.
Lee
Thanks chaps.
We have also had dampness and problems with condensation. We live in a 1940s bungalow so as you can guess its old. It does have modern soffits and fascias aswell as trickle vents on all windows.
I did think about an extractor fan but wasnt 100% sure. Im not sure which would be...
Good morning all,
I need to add some ventilation to try to stop damp and mold in all the rooms in our bungalow. We moved into the house 5 years ago and it looks like the previous owner caked it in anti mold paint so it would sell and no issues could be seen. I have one room which i store my...
Thanks so much mate. I just realised i took this photo of the back before I removed it and it looks like you are spot on going by the positions in this photo .
So the element went in our in built oven last night. It is a Bush BIOFOB and like an total amateur I forgot to note down which wires go where as my son was disconnecting the spades whilst I held the element to stop it falling as I had removed the screws. It has 5 spade connectors but I have no...
Good morning,
Hoping someone can help me here. I need to replace some kitchen spotlights but i want to go for ones that go straight into the mains rather than use a transformer. Are these ones ok for that...