I had a problem with no HW.
.. but when I turned the m/v manually (from "Normal" to "Flush") , hot water rushed through to the cylinder.
Then I replaced the whole m/v and the value it sits on top of and it fixed the problem.
During the post mortem, I found a slight build up of a...
I need to extend my horizontal pipe so that the Aqualisa shower head is further away from the wall. I was thinking of installing either a fixed straight longer pipe or the more usual flexible hose.
What can I / how can I buy something that might do the job. Will I ahve to replace the...
Yep, indeed.
I just got an email from a manager at Screwfix as my enquiry was escalated there. He tells me, as I guessed, that the size "914mm" refers to the width of the door being suspended.
I suppose it is obvious to you more experienced folks (but not so obvious to the sales staff)...
Hopefully my attached picture can be accessed. I cannot remember the manufacturer or how the adjust the float level. I guess I disconnect any linkage then see if the black float screws clockwise or anti-clockwise ...
I have a noisy boiler and the FAQs / Sticky here suggests that it is worth trying chemical cleaning before doing anything more radical.
It says: "...Add non-acidic cleanser plus a de-scaler to the feed and expansion tank...".
Would Fernox DS-40 do both jobs ?
My conventional Ideal Standard Mexico boiler works 100% OK and it turns HW and CH totally off and on, exactly at the times I have programmed.
However, my house is getting very warm because (during "On" periods) the CH is not being switched off by the wall thermostat when the desired...
I have a drain hole on the edge of the top of my roof which receives a lot of rain water from the valleys between my and the adjacent house's roof. A vertical drain pipe then takes the drain water to ground level.
The hole gets blocked up with moss, twigs and general dirt so it needs...