I trawled the Net and the Plumbing section here with no joy, could have been down to wrong keywords I guess. From experience - time is of the essence here to get it sorted. I wonder if my case was weakened due to the fact the problem didn't become apparent / reported for around 6 months after...
Hi, this sounds almost the same fault I had with my new 37CDI. Yep, every 3 mins or so a rumbling sound for 30 seconds then back to normal when the CH is on. I cannot offer a solution only my experience with this problem...
5 Engineer visits along with the WB accredited Installer each time...
Hi all.. advice needed please.
I have a 2 year old WB 37cdi fitted with an internal DT20 programmer and a Siemens RDH10RF room stat. I want to upgrade this to a programmable stat ( Honeywell CM927 gets a good review on here ) Once fitted is it just a case of switching the DT20 to constant heat...
Thing is... we've not exactly agreed on a price for this oil, whatever he offers I've got to accept or pay what I would imagine a fortune to get it removed - I don't think this point has escaped him so I'm not expecting a lot TBH.
I'm prepared to shell out 25 quid or so for a drill pump and...
Thanks John
Now theres a point I hadn't thought of.. the wear on my drill. Looks like a trip to a shed, buy a cheap 2 speed drill burn it out and take it back. Saves the old AEG getting damaged. :twisted:
Regards, HM
TicklyT... I don't know the consumption of next doors Rayburn but I suspect the temporary connection would be there for a while now its getting warmer and would need to be done safely by an Oftec engineer.
As for the Bazooka - thats how I feel about my condemned Rayburn at the mo.
:twisted:
I've been looking at Machine mart who do a drill pump (Clarke CPP3000) it reckons 40/50 litres a min. for £12. It says OK for Heating oil but I remember using a pump like this before when emptying a water tank. It fell to pieces whilst using it and we got soaked. Waters one thing..
I was...
Hi Lifesagasman...
single skinned plastic Titan? tank. I think that sealing it to pressurize it would be difficult. I don't mind buying a drill pump & hose or hiring something to do the job (safely) I just don't want to go down the route of having to pay a specialist company to dispose of the...
Newbie here... please be kind.
I wonder if anyone has any idea's on the following..
My Oil Rayburn has been deemed beyond ecconomic repair so I am going down the route of having mains gas installed and a gas boiler fitted.
My problem is I have about 800 litres of oil left in the tank, my...
My quote was for £4500 but that DID include a MagnaClean and a power flush as far as I remember.
Dave
Hi Dave, I'm at a loss how it could be so much, a I said in a previous post the cottage is very small, the job should be an installers wet dream - no inaccessable pipes to get to i.e. no...
Hi Sarah123, I won't hijack your post with my problems but I thought you and others would be interested by my WB CDi 30 quote received this week.
WB accredited installer
replace oil fired CH with a CDi combi put in loft.
Add 2 extra rads with trv's etc.
Use existing (nearly new) wireless...