Recent content by hoot37

For PowerMax+ that has 2 installer codes, the default INSTALLER code is 8888 and the default MASTER INSTALLER code is 9999. The following actions can be done only by using the master installer code: • Changing master installer code. • Resetting the PowerMax+ parameters to the default...

default engineers code is 9999 if it hasnt been changed

Enter Program 1. Press NEXT seconds until INSTALLER MENU shows 2. Press SHOW/OK, at ENTER CODE then enter your installers code then you Should be able to go to field 5 subfield 09 and select disable.

thanks for reply water in header is about half full thanks

hi just looking for some advice on a problem i havent had before. i have had a baxi backboiler for last 20 years (serviced every year) well the problem was tonight put heating on for a few hours which worked fine,but the hot water from the cylinder was only luke warm.never had this problem...

have a look here for recomendations http://www.ukwhitegoods.co.uk/forumsphpbb3/viewforum.php?f=51 also here to see the ones that seem to breadown the most http://www.ukwhitegoods.co.uk/forumsphpbb3/viewforum.php?f=34

wickes i used for my kitchen, top notch 18mm carcase( inc backs)