Recent content by huwyrag

I have a Ariston Washing Machine its a A1237 1200 SPIN. Its a cold feed only, but during a warm wash, it doesn't seem to heat up at all. I've checked for continuity across the terminals and it checks out ok, but the element has another connection to it, which I assume could be a thermistor? Not...

I have 5 flashes. NTC error. Is this the temperature thermistor fault? I haven't got the manual with this machine. :roll:

Thank you very much for the prompt reply. I will check the error codes later and hopefully will be a simple and cheap solution :P

I have a Hoover Washing Machine Nextra Optima. Model No HNL7166 -80. The machine continually comes up with "Delay Start". Th is is regardless of which cycle its on. The filter is clean and the impeller is free. Any help would be much appreciated. :cry:

Thankyou all for your help. I purchased the same as what was originally installed and set up the burner as required with my combustion analyser. All seems to be well with readings as shown in the manual. I was informed that the boiler had not been serviced for about 6 years!!! 1 Happy bunny...

I have a worcester heatslave 15/19 and the nameplate displays a 55usg 60'H nozzle. I purchased one from HRPC and when i went to fit it, the old one was 55usg 80'H. On looking in the service manual, there was no mention of the 55usg 60'H nozzle in the specifications section. If I go ahead and fit...