Recent content by Idiyh

How can I put a security latch on the gates where the gate structure width or 75mm. I have this but what bolts /screws to use. I don't want to have to drill to the other side of the gate. I want it on the inside

Mr chips... Think about it.... The house cavity spreads all round the house, so the endless foam I would need is unimaginable..... Any other ideas please that might actually work?

Hey guys, do you recommend filling this hole with micro insulation beads and then putting some kind of thin ply over the hole to prevent drafts and bugs and anything getting in? I want to seal it properly but not bridge the cavity gap otherwise moisture will travel across it right? Thankyou

Thanks guys

That's brilliant thankyou. I think the tile was blind and stupid.. They put Grout to seal round the edge of the bath rather than silicone so of course it's all crumbled away.... The legs look like this.... Is it straight forward because it didn't seem to budge when I loosened 2 of them. The red...

Hey mate, thankyou. Can you shed any more light on how to raise it.... Bit of a step by step guide? I only need to raise it about 5mm so bath panel should be good. Thanks again

Hey guys, There seems to be a bit of a gap between the last level of tiles and the top of the bathtub. Can I simply unscrew the top nut on each leg and raise it up and bring up the bottom nut to bring the height up while the bath remains in plave? This will lessen the gap for me to silicone...

Brilliant guys, Thankyou. I will give it a try and let you know how I get on

Thanks, The thing is, is that the cover extends as one piece to the other side so you can't remove it because the handle is there

Hey guys, I have brass handles on my upvc windows but the whole base is shakey on them all and moving around.. How can I access the screws to tighten? Thankyou.. See picture

Hey, Can you send me pictures of what you mean... Whether items in the internet and/or pictures from your work because I have absolutely no idea of the items you talk about. I have looked on the internet but it comes up with everything.. Pictures of the items from Wickes and the beads you talk...

Is that wedge the corner rafter?

Hi Bonni, So what does that look like using PVC planks.? .. Im a diy-er so I'm not fully certain what you mean.... The extra bit your speak off....? Do you mean the wedge of what look likes wood in the corner??.... Is it case of repairing the plaster breaking off first?... How it's the best to...

Hi guys, Please can you help me. I have an issue with the bathroom walls and ajoining ceilings. I'm trying to redecorate and paint seems to be flaking off.... With the curve it's hard to get in there with the paint scraper and sandpaper.... As you can see in the pictures the skimmed plaster...

Hello, Is it better to put new toilet and sink with built in cupboards in first or click flooring or lino first? Thankyou