They did say there is a one in a million chance that it would be the heat exchanger plate ... but have no other advice.
I appreciate that they are loathed to admit there could be a problem with the boiler, even though it is out of warranty! But I really am running out of ideas - I took the...
I am replacing the valve tonight. I spoke with Halsted earlier who send if the water is leaking in the boiler and I can't see it - and it isn't coming out of the pressure release valve it could be the heat exchange plate? Has anyone ever known that happen?
thanks again.
Thnaks Mandate. I'll check the valve and see if it is leaking either water or air; I do recall putting 10psi into it last week (with the boiler water pressure at 0) and it then being 4 or 5psi three or four days later with no water pressure in the boiler - which would suggest that there is a...
I have re-filled the expansion vessel to 10psi after being told so by Halsted; then I have re-filled the boiler to 1bar. And it still lose pressure.
I take the water out the boiler by either using the pressure release valve as i have had to replace it or recently I changed the isolation...
Thanks Mandate. I up the pressure in the boiler to 2bar when I isolate the boiler; Halsted said i'd force a leak far more easily. I have changed the pressure release valve and have a bag on the back of that pipe to check for leaks; again no leaks.
Could it be that the expansion chamber is...
Hi -
I am experiencing pressure loss in my Halsted Ace High Boiler. I have checked my radiators; 95% of the pipe work (the rest is under concrete!) and I have also have put leak sealer into the heating system with no joy.
This has led me to believe that I am losing pressure in my boiler...