Recent content by jamesbget

do you mean the metal loop in the boiler with the two black handles - should they be both facing the wall? I know the one above allows water into the tank and thats definitely turned off otherwise the pressure would go up even more

boiler left on pressure goes up and stabalises just above 3; bolier off stabalisers just above 2.5 - loop in boiler closer that hot water taps all stop no change to pressure....in morning with boiler off pressure will drop to 2 then rise oncehot water is turned on again to 2.5 plus

turned off mains cold water emptied some water from radiator, pressure went down to 1 turned on mains again pressure went back up on boiler to an unsafe level - any ideas what i am doing wrong?

cheers for the advice have allready pressed the red button pressure released then jumps back up will turn off mains cold watr feed and disconnect loop and release some water from a radiator - then i ll get some one in to undo the potential problem of me pressing that red button will let you...

Originally the pressure was too low due to leak sorted this problem but have put too much water back in and pressure now regularly exceeds 2.5 - 3 have tried bleeding radiators 5 buckets worth - Should i turn the isolating valves on the boiler back to the wall? is the system releasing water...