Recent content by JoeSt

That sounds like a good idea; I just need to find someone who has a suitable hammer I can borrow.

Not a daft question at all. Yes, a short length of 15mm copper pipe had been used where the pipe was connected to a brass stop-cock. However, I was not sure if this would still be okay when using a plastic compression fitting.

15mm copper pipe is a reasonabe fit (slightly loose, but not as loose as a pipe insert meant for a 20mm blue pipe). However, will this be okay to use where the pipe is inserted into a plastic compression tee?

Thanks for your reply. Unfortunately, they do not appear to sell one with the correct diameter.

Thanks for your reply. It must be Class C then, I think. It did have a short length of 15mm copper pipe inserted at the end of the pipe where it connected to the brass stop-cock in the house. It was held in place by the copper compression olive. However, would a bit of 15mm copper still be...

I have found that MDPE pipe inserts that fit 20mm MDPE water supply pipe are loose in black pipe from the 1980s. Please does anyone know where I can buy the correct size insert? I have found that the black pipe will fit into a 20mm blue fitting, because the external diameter it is only slightly...