Recent content by john2018

To update Dishwasher leak. Further removals, door cover and front/bottom frame removal, exposed the front edge of the tray which, when operating, is near full of water, circulating from the corners and draining back through the cutouts in the horizontal flap, probably the cutouts are not big...

Zanussi Aquasave Type. 91181-2A Ser. 60800400 Prod. 911812019 The sides and top door seal looks good and is tight on the internal stainless steel lining on closing. The door bottom rubber is not a seal, just a flap, to slow water progressing forward within the base tray. The leak runs...

Yes got a load of schematics with a more limited search but they were all for recent machines. Took the motor apart and confirmed the field coil winding direction etc so I have a better idea how to set up the connector. The old motor has a date on the bar code label 04/96 ! The insulation...

jj4091, Thanks for the above. I have been on you tube but have only found projects wanting to use motors to power something and do not use the control components. I will search for a schematic from the 1990's as a start point to draw up what I have.

Hi all, I am looking for confirmation of control PCB and mechanical contactor switch(MCS) wires to a new motor which has a plastic connector with 6 spades including the two tacho wires. The old motor has 8 spades including two tacho (not a problem) and two loop wires. The loop connects the...