Recent content by johnnyfavorite

  1. J

    CH hot water not reaching top floor

    OK many thanks will give it a go.
  2. J

    CH hot water not reaching top floor

    When the boiler was replaced a couple of years ago the fitter, who now works for Gas Safe as an inspector I understand, did not think it necessary to change from the existing open vented system. Maybe he thought the old pipe work joints could not cope with the additional pressure. I see that I...
  3. J

    CH hot water not reaching top floor

    OK will have a go at rebalancing many thanks for your help
  4. J

    CH hot water not reaching top floor

    oops the boiler is 24KW
  5. J

    CH hot water not reaching top floor

    Thanks for the reply. The boiler is 20 KW output and turned almost fully on, and the rads total is 20021W using the Stelrad table you referred to. The hall rad (biggest in the house) valves are fully open and is the only one with no thermostatic valve (to satisfy the rule that there must...
  6. J

    CH hot water not reaching top floor

    My house has a gravity fed pumped CH newish gas boiler with motorised valve in cellar with 3 floors above, HW tank on 1st floor. CH header tank is only slightly higher than top of the highest radiator on 2nd (top) floor. House has 13 radiators across the three floors, and all get nice and hot...
Back
Top