Recent content by karlrees

  1. K

    How to wire 2 'push to break' door switches to 1 LED driver

    that's brilliant. Thanks! Yes, they've just got the two core stuff I think - no earth. Thanks again.
  2. K

    How to wire 2 'push to break' door switches to 1 LED driver

    [/url] Ah-ha. It's becoming clearer now. Still a bit of head scratching to do, but I think I'll get there. Thanks again for your help. karl
  3. K

    How to wire 2 'push to break' door switches to 1 LED driver

    Thanks for your reply. I understand the theory of this (rather than it being in series), but do you happen to know of a diagram which would help me to wire this up? Will I need a junction box or two to put in the second switch? Sorry - I'm a cabinet maker with very little electrical...
  4. K

    How to wire 2 'push to break' door switches to 1 LED driver

    Hi all, I've just made a cocktail cabinet with two doors and a central division. The client wants an LED strip light to turn on when either of the doors opens. My plan was run a single length of LED strip light along the cabinet through the central divider and run it off the one 12v...
  5. K

    240v Pillar drill keeps tripping out

    Hi there, Just bought an old Meddings Pacera 240v bench drill. It has an old MEM STARTET on/off switch unit, which keeps on tripping out after a couple of mins. I'm a cabinet maker, so no knowledge of electrics. Any ideas why it might be doing this? Happy to supply more info if...
  6. K

    Secondary Glazing

    Hi there, My Sash windows are really drafty. Can anybody recommend a secondary glazing installer in London (East)? Thanks in advance. Karl
  7. K

    Can you recommend a good condensing combi?

    Hi there, My PUMA 80 is on its last legs and I'm condsidering replacing it with a condensing boiler. I've been quoted £1450 for fitting a Vaillant Ecomax 828e, which also incudes flushing out of heating system, diverting my flu and dosing system with a chemical chorosion inhibitor. Is...
  8. K

    Water doesn\\\'t stay hot

    Yup. Live in East London, so the water is pretty hard. I seem to recall that a plumber once said there was some kind of a diaphragm that controls the flow(?) and may need replacing. Forgive my ignorance if this makes no sense...
  9. K

    Water doesn\\\'t stay hot

    Cheers for your reply. The boiler dial says the pressure's around 1.5 bar. The tap flow isn't too bad - although somethimes it comes out in 3 streams for some reason.
  10. K

    Water doesn\\\'t stay hot

    Hi there, I've a Potterton Puma combination boiler which fires up okay when the hot tap is turned on, but fails to stay hot for very long. After 20 secs or so the water turns cold and then back to hot after another 20 secs. Makes a shower of any length rather hard work. I'd be really...
Back
Top