Recent content by kevintat

Just tried entering the Eng Prog but the attack light is not lit - just the tamper? So do I just open the box in the day mode and not bother trying with the Eng Prog? Then on firing the alarm enter user number but not hit the reset button. 240v off of course but 12v remaining connected...

Thanks - This looks good and what I will be attempting - fingers crossed >>>

Anyone else able to give some guidance on powering down the Optima G4 without setting off the alarm or if it does go off ensuring it can be turned off without having to wait for it to time out or for the battery in the bell box to exire?

Thanks - I have the eng code and the manual but not the confidence as on my last effort I succeeded in firing the alarm and could not turn off the external bell for 30 mins or so attracting the 'interest' of new neighbours. Although manual details powering up it doesn't explain best way to...

Thanks I don't mind a bit of fiddling and if necessary I will have to get the old soldering iron out - anything to save running a new cable and spoiling decorations. Presumably it is possible to have a PIR and contacts on the same timed loop? Just checked contacts - 4 wires so could use...

Thanks - I will have a look at the wiring to see if there is 12v to this point and if not there may be a chance of powering up other cores to get power to the proposed PIR?

CAN ANYONE HELP - IS THERE AN EASY SOLUTION? I have just moved house and find that the new hall way is unprotected by the alarm system, the worst case being an intruder could enter through the downstairs loo (although window tiny) into the hallway and get upstairs at night (upstairs being...